-
Horizontal Stab Layout
December 24th. 2010: The components for the horizontal stabilizer have been completed over the last few months and it is now time to match drill and assemble these. Shown above are the horizontal stabilizer ribs and spars before match drilling. On the opposite side of the table are the elevator skins, ribs and root ribs…
-
Horiz Stab Spar Channel Ooops
Bend spar channels and identify one hole mis-drilled in T03-06 (damn!). Begin marking of elevator ribs (T04-xx) parts. Return To Horizontal Stabilizer – Empennage
-
Rough Cut H Stab Spars
Some Pictures: Return To Horizontal Stab – Empennage Page