Dan finished riveting the frame together. He put the skins on with clecos:
Here is a close up of the leading edge, looks really nice. I am glad our tech councilor suggested to get a good bend on the leading edge.
Here is the leading edge looking from the outboard side:
Here is the training edge with the hinge:
Just before staring to rivet
One skin side flush riveted:
Here is the completed Horizintal Stabilizer:
Dan noted that you have to really have the rivet gun square/flat with the skin or the rivet might become tipped a little in the dimple. Only a couple had to be drilled out.
After admiring our work and gloating for a minute we hung it on the wall.